Jump to content
Big 'D'

382.8bhp from a VF35

Recommended Posts

Hi all

I have just been to Subaru4u in Newbury for a power run and left with a huge smile on my face.

IMG00221-20101007-1221.jpg

I am not certain that the intake temp is accurate though :)

Cheers Iain

Share this post


Link to post

Really good figures Iain, is that just V-Power no booster or meth?

Robert

Thanks mate, V-Power :thumbup:

Cheers Iain

Share this post


Link to post

Excellent results mate!

That is some achievement out of a turbo that is maxed out at 340/350!!!

The proof is on the pudding.

Share this post


Link to post

Brilliant mate! Super duper, neato, way to go ;) ha

This has made me want to get modding even more now!

How much is the dyno run at subaru4you if you don't mind me asking?

Share this post


Link to post

Brilliant mate! Super duper, neato, way to go ;) ha

This has made me want to get modding even more now!

How much is the dyno run at subaru4you if you don't mind me asking?

Thanks Mate, it was £50 and worth every penny, you should have seen the smile on my face.

Cheers Iain

Share this post


Link to post

Thanks Mate, it was £50 and worth every penny, you should have seen the smile on my face.

Cheers Iain

Glad to hear a recommendation for the rolling road at subaru4you. Once I get my cambelt changed was going to take my standard Blobeye WRX there to see what it does now, then if I make any mods go back to see the results :rolleyes:

Edited by shwrx

Share this post


Link to post

Thanks Mate, it was £50 and worth every penny, you should have seen the smile on my face.

Cheers Iain

That's a fair price! I saw the dyno in there when I went to get my cambelt done.

I bet, was it the kind of smile you had at Santa Pod last year?

Do you keep getting your readout out your pocket every 5 seconds and pointing to it? haha ;)

Fantastic results though, deserves recognition!

Mike

Share this post


Link to post

That's a fair price! I saw the dyno in there when I went to get my cambelt done.

I bet, was it the kind of smile you had at Santa Pod last year?

Do you keep getting your readout out your pocket every 5 seconds and pointing to it? haha ;)

Fantastic results though, deserves recognition!

Mike

Mate the smile was way bigger almost as big as when I came 4th in class D at USC this year whilst running 1.4 Bar :lol:

Cheers Iain

Share this post


Link to post

Excellent result there Iain.

Ay Subaru 4 U are a good bunch, Mines been in there a couple of times, before I took the plunge & now do most of the work DIY

Andy

Share this post


Link to post

Excellent result there Iain.

Ay Subaru 4 U are a good bunch, Mines been in there a couple of times, before I took the plunge & now do most of the work DIY

Andy

Thanks mate, must get you and the lad out in her for a blast, you can take the helm if you want :)

Cheers Iain

Share this post


Link to post

Excellent result there Iain.

Ay Subaru 4 U are a good bunch, Mines been in there a couple of times, before I took the plunge & now do most of the work DIY

Andy

Have you managed to find a decent workshop manual? I am struggling to find one :mellow:

Share this post


Link to post

Have you managed to find a decent workshop manual? I am struggling to find one :mellow:

Have a look through this lot fella, LINK.

Cheers Iain

Share this post


Link to post

Very good result :)

If you dont mind... what supporting mods are you running ?

Simtek ECU with ALS

Apexi AVCR boost control

VF35 with ported wastegate and 1.0 Bar actuator

Full decat inc tubular headers + up pipe

AB88 FMIC + Forge BOV

550cc injectors, Fuel Lab FPR @ 3bar, parra' fuel rails, walbro fuel pump.

Heatshielded Apexi power intake.

Think thats it :)

Cheers Iain

Share this post


Link to post

Welldone :D

Im just in the mix off a VF43 on my P1 so just curious, thanks ;)

I may be playing with a VF43 in the very near future I will keep you posted.

Cheers Iain

Share this post


Link to post

Have you managed to find a decent workshop manual? I am struggling to find one :mellow:

I haven't got a ful manual, I've some exerts from the workshop manual but the rest of it is learnt from advice & hint's & tip's from on here.

Won't mention any names but you'll get to know them quickly enough.

Andy

Share this post


Link to post

Well after a long week and a 16 page long debate on SN I went back to Subaru4U today for a 2nd dyno run, we proved today that my intake temp is actually very high and that my intake needs work to get the temps down but check this for consistency.

IMG00002-20101013-1623.jpg

Same power output down to 0.1bhp 7 days after the first dyno.

Cheers Iain

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...